Step 1: Slide each dolly, one at a time, under the object being moved. Ensure that the toe plate is fully positioned beneath the load. 

Pro Tip: The toe-plate may kick out if there isn't enough force on it, if that happens wedge something like a shim underneath the toe-plate to keep it in place. 

Step 2: Attach each ratchet (one at a time) to the corresponding eyebolt on the opposite dolly. 

Step 3: Once attached begin to tighten the ratchets to lift the load. 

Pro Tip: When lifting the load pull on the ratchets slowly and smoothly. "Slow is smooth, and smooth is fast."

Step 4: Attach one end of the included safety strap to an eye bolt. Next, wrap the strap around the opposite dolly and secure the other end to the second eye bolt. Pull the cam buckle to tighten the strap and remove any slack. Once secure, you're ready to roll.

Step 5: Easily move your item

 

Step 6: Once your object is in position, begin disengaging the ratchets by pressing the red handle shown in the graphic. You will hear the ratchet release. The load is now ready to be lowered.

Step 7: Lower the load by pressing the cam buckle on the safety strap. For best control, use short, slow pulses. Exercise caution, as the dollies may shift unexpectedly.

Step 8: Unhook the ratchets from the eye bolts, and remove the dolly from underneath the load.